Marcus' Model Railways | Search

Total matches for June 2008: 11

Body and ends of a QR open wagon in styrene

Body and ends of a QR open wagon in styrene
18 June 2008

Casting resin (from http://www.barnesonline.com.au/) along with other bits and bobs

Casting resin (from http://www.barnesonline.com.au/) along with other bits and bobs
30 June 2008

Finished casting - a dud because I didn't get rid of the air bubbles between the resin and the plastic on top

Finished casting - a dud because I didn't get rid of the air bubbles between the resin and the plastic on top
30 June 2008

Life-Like SW9 converted into a VR Y class, before and in progress

Life-Like SW9 converted into a VR Y class, before and in progress
18 June 2008

Life-Like SW9 converted into a VR Y class, before, in progress and after

Life-Like SW9 converted into a VR Y class, before, in progress and after
24 June 2008

Making a casting - poured in the resin, then put scrap plastic over the top to make a flat base

Making a casting - poured in the resin, then put scrap plastic over the top to make a flat base
29 June 2008

Mould for a wagon underframe set, still have to pull out the master. I should have glued it down to the box base, to avoid the silicone getting on the back

Mould for a wagon underframe set, still have to pull out the master. I should have glued it down to the box base, to avoid the silicone getting on the back
29 June 2008

Mould with the master removed

Mould with the master removed
29 June 2008

Pouring a casting without putting something on top - no bubbles, but you need to file heaps off it when set

Pouring a casting without putting something on top - no bubbles, but you need to file heaps off it when set
30 June 2008

Side of a QR open wagon in styrene

Side of a QR open wagon in styrene
18 June 2008

The box for making the mould in

The box for making the mould in
29 June 2008


Gallery RSS RSS Feed | Archive View | Contact Me | Copyright 2005 - 2024 © Marcus Wong | Powered by Zenphoto